Would you like to return your KLARA POS? Then request your return number at support@klara.ch. The POS including accessories must be sent back in the original packaging. The address label is in your package.
Primelco System Devine AG
Technik / Your return number
Neuhofstrasse 25
6340 Baar
Do you have support questions or require help? Contact us: support@klara.ch
Unpack the receipt printer and feed a roll of paper into it
When using the EPSON receipt printer TM-m30 II model
- Remove the bottom of the receipt printer
- Connect the power cable and the cable for the cash drawer /fr-ch/caisse/installer
When using the Bixolon receipt printer SPR-Q302 BTK model (other Bixolon printer models are not compatible)
- Remove the bottom of the receipt printer
- Connect the power cable and the cable for the cash drawer. The power connector is the round connector at the top (third from the left). The cash drawer is connected at the side (where it ismarked DK)
- Enter code 0000 to pair with Bluetooth on the tablet
- Connect the loose end to the cash drawer
- Clamp the tablet onto the stand at the corner
- Lock the stand at the back
- Now follow the steps in the online instructions on: www.klara.ch/en/pos/set-up
