Skip to main content

scanner with the yellow button

Samira Cioffi
  • Updated

Summary

This manual refers to the scanner with the yellow button. If your scanner does not have a yellow button, follow the provided instructions to set up your scanner.

Instructions for Setting Up the Scanner

If your scanner does not have a yellow button, use the following instructions to set up your scanner: Scanner Setup Instructions.

Charging and Configuration

  1. Charge the scanner using the provided cable.
  2. Refer to the NETUM scanner manual that was sent with the scanner for additional setup instructions.

Scanning Codes

To configure your scanner, perform the following steps:

  1. Scan the code "Factory Settings (%#IFSNO$B)" on page 11.
  2. Scan the code "Bluetooth transmission (%#iFSN0$4)" on page 13.
  3. Scan the code "Basic Mode (AT+MODE=2)" on page 14.
  4. Scan the code "German keyboard ($LAN#GE)" on page 15.
  5. Connect the scanner to the cash register through the settings. Ensure that location, Wi-Fi, and Bluetooth are enabled on the tablet.

Important Notes

  • The scanner must not be connected to power or a computer with a cable while in use.

FAQ

Q: What should I do if my scanner does not have a yellow button?

A: Follow the instructions provided in the setup link for scanners without a yellow button.

Q: How do I charge the scanner?

A: Use the provided cable to charge the scanner.

Q: What settings need to be enabled on the tablet?

A: Ensure that location, Wi-Fi, and Bluetooth are enabled on the tablet for proper connection.

Related articles